Creative Materials introduces 125-22-F isotropic and 126-37-F anisotropic series of B-stage electrically conductive adhesive films. The adhesive film series offer controlled reflow and high reliability. Both series of products are available in sheets and as custom preforms to customer-specified geometries.
High-temperature & Chemical Resistant
125-22-F is available in standard thicknesses of 1-5 mils; other thicknesses can be requested. 126-37-F is recommended for use at 1 or 2 mil thicknesses. Another version of 126-37-F accommodates atypical bond-line thicknesses and contact pitches. All these films and preforms are supplied on an easy-to-remove release liner.
These products offer excellent thermal stability and high-temperature properties to 325ºF, excellent electrical conductivity, chemical resistance when fully cured, adhesion to a wide variety of high-energy surfaces, minimal flow during bonding and curing, and low CTE. Cure temperatures as low as 100ºC can be used.
Both products are typically used in conductive splicing of ribbon cables, PTF circuits, electrical attachment of surface-mounted devices as well as assembly of electrical and electronic components. The anisotropic product is used when shorts between closely spaced contacts is a concern.
Creative Materials designs, develops, and custom manufactures specialty electronic inks and adhesives. The company holds both ISO9001 and ISO14001 certifications. All products are manufactured in the USA.
加载中...
